Articles

Effect of coating composition on UV curable powder coatings

R. A. Bayards, M.M.G. Antonisse And E. Meij, DSM NeoResins, 2001 Conference

Powder coating properties aredetermined to a great extend by the formulation and the cure conditions. This influence is even larger in the case of UV curable powder coatings, since the UV absorbance of additives and pigments directly affects the process of network formation.

Costs: € 10,00 
Content: 8 pages

Graphic Arts Working Group "UV-Basics, Benefits and Market trends"

2001 Conference

The previous paper has set out the basics of the chemistry for UV curing, outlined the
benefits and shown some market trends. This paper will demonstrate the requirements for the curing equipment needed for efficient polymerisation of the ink or coating chemistry..

Costs: Free
Content: pages

Progress in Cationic Chemistry: Colored UV-curable Powder Coatings

Dr. M. Reisinger And Dr. Ch. Rickert, 2001 Conference

Clear and pigmented IR I UV curable powder systems based on the photo-induced cationic polymerization of solid, bisphenol-A based epoxy resins in the presence of a chain transfer agent have been developed.

Costs: € 10,00 
Content: 10 pages

Status en progress of Radiation Curing in Asia

W.-F. Shi, 2001 Conference

Radiation curing including ultra-violet (UV) and electron beam (EB) curing technology is now being increasingly used in various sectors of applications, mainly in the coating industry, graphic arts, and microelectronics, replacing conventional thermally cured solvent-based coatings, inks and adhe

Costs: € 10,00 
Content: 8 pages

Commercialisation Efforts and Successes with UV Powder in Europe

2001 Conference Commercialisation Efforts And Successes With UV Powder In Europe, 2001 Conference

 

 

Costs: € 10,00 
Content: 6 pages

UV-Curable Powder Coatings on 3-D, MDF Substrates - A New Technology

2001 Conference

Uv-curable powder is very well suited for coating 3-dimensional objects made from medium density
fibreboard (MDF), typically for use in kitchen, bathroom and general furniture applications. In this

Costs: Free
Content: pages

The Status of UV Curable Powder Coatings in North America

P. Mills, 2001 Conference

The joke used to be that North American powder manufacturers couldn't even spell UV.
Today that just isn't the case any more. At least a dozen powder manufacturers have
been to our laboratory to run parts at one time or another. At least half of these suppliers

Costs: € 10,00 
Content: 8 pages

UV - Basics Benefits and Market Trends

Although UV light curing technology has been used for over 30 years in the printing industry, it is still a new technology by comparison with conventional printing.

Costs: Free
Content: pages

Photodegradable Toners for Electrophotography II. Accelerated Photodegradation of Matrix Resin by DUV-Exposure at An Elevated Temperature

K.Sugita, T. Ishizawa, H. Tateno, M. Kushida, K. Harada, K. Saito, N. Namatame And N. Mogi, 1999 Conference

Phenyl isopropenyl ketone was terpolyme— rized with styrene and n-butyl'acrylate. Clear
400 am thick layers of the terpolymer on glass plates were found to be removed by brushing-off
after deep ultraviolet (DUV) exposure for 3—5 nun at room temperature or for 1 mm at 80—

Costs: € 10,00 
Content: 6 pages

New Aspects of UV-Drying of Screen Printing Inks

E. Lendle, 1999 Conference

Since the last RADTECH in Lyon we can see on this congress a lot of new developments by inks and

Costs: € 10,00 
Content: 8 pages

Pages