Articles

Experiences with UV curable PSA's on a production facility

P. Burger, D. Skinner, P. Field And M. Draper, 1999 Conference

UV curable PSA systems have been available for several years. Since this time the interest
in the market has grown steadily, but slowly. There appears to be various reasons for the
reluctance to adopt this technology on a wider scale. Certainly, the limited range of raw materials

Costs: € 10,00 
Content: 8 pages
Industry: Adhesives

Rubber-based Radiation Curable Pressure Sensitive Adhesives

M. Dupont, M. Masse and J. Schneider, 1999 Conference

Styrenic block copolymers (SBC) are widely used in a variety of pressure sensitive adhesive (PSA) applications both in tapes and labels. The most commonly used styrenic block copolymers for adhesive applications are tn-blocks containing an elastomenc mid-block and thermoplastic end-blocks.

Costs: € 10,00 
Content: 8 pages
Industry: Adhesives

Uv-Curable Acrylic Pressure Sensitive Adhesives Features, Mechanisms, Milestones

1997 Conference

Although UV curing of acrylic pressure sensitive adhesives is known for more than 30 years, the

Costs: Free
Content: pages
Industry: Adhesives

Sheet Laminating With Uv Curing Adhesives For The Print Finishing

R. Remund, 1997 Conference

The print finishing has made over the recent years a considerable structural and
technical change, this in particular under the aspects of environment and waste recycling.
The enormous numbers of new regulations and issued laws, which contain

Costs: € 10,00 
Content: 6 pages
Industry: Adhesives

Reactive Polymers For UV Curable Pressure Sensitive Adhesives (PSA's)

E.-J. Gerard and J. Schneider, 1997 Conference

High molecular weight anlonlc block copolymer
were brought to the market place some 30 years
ago. Based on feedstocks which can be
polymerised through anionic polymerisation (e.g.
lsoprene, butadiene or styrene), such styrenic block

Costs: € 10,00 
Content: 7 pages
Industry: Adhesives

Radiation Curable Pressure Sensitive Adhesives

Prof. Dr. K. Nitzl, 1995 Conference

The ongoing environmental discussion has also touched the field of adhesives. In response to the concerns expressed, solvent-free systems are gaining increasing significance in the pressure-sensitive adhesives segment.

Costs: € 10,00 
Content: 9 pages
Industry: Adhesives

UV Curing of Styrenic Block Copolymer Based Pressure Sensitive Adhesives

Ir. M. Dupont and Dr. N. De Keyzer, 1995 Conference

Styrenic block copolymers (SBC) are widely
used in a variety of pressure sensitive adhesive
(PSA) applications both in tapes and labels.
The most commonly used styrenic block
copolymers for adhesive applications are tnblocks
containing an elastomeric mid-block and

Costs: € 10,00 
Content: 11 pages
Industry: Adhesives

How To Tackle Adherence Problems With Uv Formulations?

B. Magny, A. Askienazy, E. Pezron and C. Valley, 1995 Conference

One of the limitations of UV curing systems is the difficulty to get adherence on non porous

Costs: € 10,00 
Content: 15 pages
Industry: Adhesives

Water Transport Properties of Radiation-cured Coatings and their Effect on Adhesion

N. Acham, R. Holman, R. Kennedy and J. Crisp, 1995 Conference

Organic polymers are, unlike ceramics or metals, permeable to a greater or
lesser extent to water vapour. Thus, it is important to bear in mind how the water
transport properties will affect their performance in the environment in which
they will operate.

Costs: € 10,00 
Content: 18 pages
Industry: Adhesives

Radiation Curing Of Pressure Sensitive Adhesives: An Overview

W. Karmann and S. Zollner, 1995 Conference

For more than four decades radiation curing of pressure sensitive adhesives has been known. Work has
been contributed by many companies and institutes and thus the information is scattered over a great

Costs: € 10,00 
Content: 12 pages
Industry: Adhesives

Pages