Articles

Preparation and Characterization of Hybrid Organic-Inorganic Nanostructured UV-Cured Coatings

M. Sangermano, E. Amerio, G. Malucelli, R. Bongiovanni, A. Priola, 2007 Conference

Today, multifunctionality in a coating is essential; in fact coatings do not only provide a certain protection towards the environment or optical appearance to a surface, but  they should also provide additional functions the environment or optical appearence to a surface, but they should provide

Costs: € 10,00 
Content: 6 pages
Industry: Formulation

New Method of Stabilization of Sol-Gel-Nanoparticles in Dual-Cure-Formulations

Y. Wilke, V. Stenzel, A. Brinkmann, 2007 Conference

The requirements to scratch-resistant surfaces soared in the years. There are numerous of examples for it, like industrial coatings, automatives clearcoats and formable coatings for oil coating or fiol applications.

Costs: € 10,00 
Content: 6 pages
Industry: Formulation

Innovative UV-dose Indicator Formulations for Curing Control of Coatings

K. Studer, C. Lordelot, T. Jung, K. Dietliker, U. Lehmann, P. Simmendinger, S. Villeneuve, 2007 Conference

Efficiency of UV-curing strongly depends on the radiation-dose absorbed by the fil,: low UV-dose leads to an incomplete converstaion, poor quality material, unpleasant odor and migration hazards, while non-uniform illumination results in inhomogeneous material performance all over the substrate.

Costs: € 10,00 
Content: 6 pages
Industry: Formulation

Innovative UV Inert System - Benchmark for UV Newspaper Printing

L. Hahne, F. Knopf, 2007 Conference

During the 2005 RadTech conference in Barcelona the basics of this new technology had been presented and explained.

Costs: € 10,00 
Content: 5 pages
Industry: Formulation

Urethane acrylates: expansion of radiation curable epoxy acrylate coatings

Henry C. Miller, 1989 Conference

Urethane and epoxy acrylate resins have been the backbone of radiation and electron beam cure coatings for over twenty years. Aromatic urethane acrylates have beendeveloped that bridge the epoxy acrylate properties.

Costs: € 10,00 
Content: 11 pages
Industry: Formulation

UV-Curable gel-polymer electrolytes for Li-ion battery applications

R. Bongiovanni, 2009 Conference

The development of advanced materials for energy storage and conversion has been receiving wide attention to meet the rising demand for clean energy technologies.

Costs: € 10,00 
Content: 9 pages
Industry: Formulation

UV Assisted spraying: the flexible approach to UV curing

M. van Pul, 2009 Conference

Several years ago AkzoNobel Car Refinishes presented a novel UV-A curing high solids clear coating, based on a modified 2K technology and a photolatent base catalyst [1].

Costs: € 10,00 
Content: 11 pages
Industry: Formulation

Tackling the drawbacks of waterbased UV-Systems

O. Lafuente Cerdá, 2009 Conference

The use of aqueous dispersions for radiation-curing coatings has increased within the last 20 years.

Costs: € 10,00 
Content: 8 pages
Industry: Formulation

REACH / Uses and Exposure

U. Dreyer, 2009 Conference

The central concern of REACH is the safe use of chemical substances with regard to humans and the environment. For each substance the supplier has to determine the risks and to show that these risks can be controlled during the whole life cycle of the substance.

Costs: € 10,00 
Content: 1 page
Industry: Formulation

Innovative route for the synthesis of hybrid nanocomposites by a single step organic and inorganic photopolymerization

C. Croutxé-Barghorn, 2009 Conference

The present paper focuses on the potentialities offered by derived hybrid sol-gel photomaterials to assess innovative UV-cured nanocomposites coatings.

Costs: € 10,00 
Content: 6 pages
Industry: Formulation

Pages