Articles

Influence of Crosslinking Density of Radiation Curable Coatings on Scratch Resistance, Hardness and Flexibility

BASF SE, 2005 Conference

Radiation curable coatings based on urethane acrylates offer a broad spectrum of performance providing a range from highly elastic to very hard coatings with high toughness and abrasion
resistance. Furthermore, aliphatic urethane acrylates show good weather resistance. However, the

Costs: Free
Content: pages
Industry: Chemistry

Thiol-Enes: Fast Curing Systems with Exceptional Properties

C.E. Hoyle, 2005 Conference

The use of light to cure systems for applications ranging from protective coatings on floor tiles and optical fibers to coatings on compact discs has grown steadily since the first commercial uses were reported over fifty years 1 Virtually all free-radical photocurable systems today are based upo

Costs: € 10,00 
Content: 7 pages
Industry: Chemistry

New Methods for Matting of 100% UV-Coatings

H.D. Christian, 2005 Conference

Radiation-curable coating systems are gaining ground in an increasing number of applications, thanks to their favorable emission behavior. The most important market segment in Europe is the wood coating sector with over 14%.

Costs: € 10,00 
Content: 8 pages
Industry: Chemistry

Novel Cationic Photoinitiator

M. Visconti, 2005 Conference

Cationic energy curing systems are used today in different industrial applications such as coatings, release coatings and graphic arts.

Costs: € 10,00 
Content: 10 pages
Industry: Chemistry

Allophanate Structures as Building Blocks for Very Low Viscous Urethane Acrylates

M. Ludewig, Covestro Deutschland AG, 2005 Conference

Urethane acrylates exhibit particularly good properties as binders for UV curable resins including toughness, chemical and abrasion resistance, flexibility and weather resistance (aliphatic types).

Costs: € 10,00 
Content: 8 pages
Industry: Chemistry

Metal Containing Acrylic Oligomers

G.W. Ceska, 2005 Conference

Many papers have been written describing metal containing oligomers. (12,3) Little has been reported on metal containing acrylic oligomers. (4, For years, Sartomer Company has produced zinc diacrylate (ZDA) for use in peroxide cured rubber.

Costs: € 10,00 
Content: 8 pages
Industry: Chemistry

Novel Self-Initiating UV-Curable Resins: generation Three

M. Gould, 2005 Conference

A previous paper presented at Radlech 2002 discussed novel self-initiating resins that UV-cure with no or very little added photoinitiator.

Costs: € 10,00 
Content: 9 pages
Industry: Chemistry

New Routes to Urethane Acrylates

J. van Holen, 2005 Conference

Known to be able to enhance numerous key performances like adhesion, toughness, flexibility, abrasion resistance, pigment wetting or cure speed, mono- and multifunctional (meth)acrylates bearing urethane groups are widely used in varnishes, inks and adhesives.

Costs: € 10,00 
Content: 8 pages
Industry: Chemistry

UV-Curing of Acrylonitrile - Butadiene Elastomers

C. Decker And T. Nguyen Thi Viet, 2001 Conference

Thermoplastic elastomers can be readily crosslinked at ambient temperature by UV-irradiation in
the presence of a photoinitiator 1.2 These polymers, like styrene-butadiene block copolymers
(SBS), have a two-phase morphology, and are commonly used as pressure-sensitive adhesives,

Costs: € 10,00 
Content: 6 pages
Industry: Chemistry

UV/EB Silicone Realease Coating - Global Approach

J.-M. Frances, S. Kerr III And O. Pinto, 2001 Conference

UV Silicone release coatings have been industrial for. more than ten years. However, their market share is still rather low in comparison with solventless thermal re!ease coatings.

Costs: € 10,00 
Content: 12 pages
Industry: Chemistry

Pages