Articles

Water- and oil-repellent finish of PET fabrics using UV irradiation

Su-Jin Kim and Jinho Jang, 2011 RTE Conference

UV-curable water- and oil- repellent finish was carried out to impart one-side repellency to the PET fabrics using a formulation of a UV-active fluorocarbon agent and a water soluble photoinitiator. The aqueous formulation was padded on the PET fabrics and was subsequently UV-cured.

Costs: € 10,00 
Content: 5 pages
Industry: Formulation

The secrets of matting 100% radiation curable coatings

H.-D. Christian; Jan Büker; Reinhard Behl, 2011 RTE Conference

Over the last years, there have been many publications and presentations dealing with the subject of matting 100% radiation curable coatings.

Costs: € 10,00 
Content: 11 pages
Industry: Formulation

Study the curing and mechanical properties of a pigmented UV curable epoxy acrylate system

P. Kardar, M. Ebrahimi, S. Bastani, 2011 RTE Conference

In this research the effect of the presence of a micro tio2 pigment on the curing behavior and mechanical properties of a UV curable epoxy system was studied. The formulations contained different acrylate monomers with different structures and functionalities.

Costs: € 10,00 
Content: 7 pages
Industry: Formulation

Matting of 100% UV transparent coatings with near-nanoparticles

Jonathan Phipps, Mark Andrews & Nick Wood, 2011 RTE Conference

Matting of transparent coatings is commonly achieved using porous inorganic matting agents with high surface area and oil absorption, and a particle size in the range of 5-15μm.

Costs: € 10,00 
Content: 10 pages
Industry: Formulation

Improved Surface Properties with Multifunctional, Cross-linkable Additives for UV Systems

Dr. Marc Hans, Petra Lenz, BYK Chemie GmbH, 2011 RTE Conference
  • Established siloxane chemistry and additives
  • New building blocks
  • Two synthetic strategies towards UV additives
  • Application results
Costs: € 10,00 
Content: 11 pages
Industry: Formulation

Formulation of UV cationic polymerizable mixtures for inkjet printing

Jan Vališ, Miroslav Tejkl, Bohumil Jašúrek, Anežka Rusňáková, 2011 RTE Conference

The main purpose of this work was to prepare samples of UV cationic polymerizable mixtures suitable for inkjet printing and evaluation of their physical and chemical properties. Samples consisted of four types of monomers, the photoinitiator and the stabilizer. Monomers 3,4-epoxycyclohexylmethyl-

Costs: € 10,00 
Content: 6 pages
Industry: Formulation

Formulation for Efficient Matting in 100% UV-curable Coatings

David J.Kent, 2011 RTE Conference

A low gloss or matt effect is frequently a key feature or requirement of many coating materials applied to the surfaces of man-made objects or constructions.

Costs: € 10,00 
Content: 9 pages
Industry: Formulation

Field Applied UV Curable Coatings for Flooring

Dr.J. Arceneaux, Dr. S. Smeets, Mr. J. C. Smith, Mr. G. Vanmeulder, Allnex S.A./N.V., 2011 RTE Conference

In the past five or so years, commercial UV curing has moved out of the factory and into the field, with numerous improvements in UV curing equipment pushing the transformation of this technology into the area that one calls Field Applied UV Curable Coatings.

Costs: € 10,00 
Content: 11 pages
Industry: Formulation

Decorative Ceramic Surfaces using UV-curable Adhesion Promoters and Nanocomposites Coatings

J. Gonzalez, V. Sanz, Y. Bautista and C. Ribes, 2011 RTE Conference

Digital printing is becoming important in the ceramic tiles industry in order to obtain surfaces with excellent technical and aesthetic properties.

Costs: € 10,00 
Content: 15 pages
Industry: Formulation

Anti-corrosion properties of UV-cured coatings

Saeed Rastegar, Zahra Ranjbar, 2011 RTE Conference

The corrosion resistance of a polyester-acrylate-based UV-curing coating was investigated using electrochemical impedance spectroscopy.

Costs: € 10,00 
Content: 11 pages
Industry: Formulation

Pages