A series of low odor acrylated silicones will be photo cured with both themselves and acrylated organic polymers. Their properties will be measured both during and after they cure and evaluated for 3D printing applications.
The present work addresses a strong market demand for oligomers for 3D printing formulations. Structure-property relationships in a new family of oligomers will be discussed.
A talk on disruptive technology, market figures, technologies in additive manufacturing and UV=LED in additive manufacturing. As well as details on various testing results.
The 3D UV additive production system employs a photopolymerization to build up thin layers of a part of 3D-object. We developed a one-dimensional mathematical model of the photopolymerization kinetics to elucidate the conversion of monomer and shrinkage. The photopolymerization is likely inhibi
In just the past few years, advances in UV LED technology has been able to provide peak output powers commensurate with and greatly exceeding microwave lamps.
Formulation modification has enabled the use of an increasing number of UV LED curable adhesives, inks, and coatings for commercial applications. Among the available formulations, the variation in curing performance is quite large and surface cure remains the biggest challenge to overcome with L
In the regulatory affairs section, you can find an overview of EU legislation relevant to UV and EB curing technology and our initiatives for the industry.
