Articles

Low Odor Acrylated Silicones for SLA 3D Printing

B. Ruckle

A series of low odor acrylated silicones will be photo cured with both themselves and acrylated organic polymers. Their properties will be measured both during and after they cure and evaluated for 3D printing applications.

Costs: € 10,00 
Content: 32 pages
Industry: Other

New Oligomers for 3D Printing Inks

A. Nebioglu, Dymax Europe GmbH

The present work addresses a strong market demand for oligomers for 3D printing formulations. Structure-property relationships in a new family of oligomers will be discussed.

Costs: € 10,00 
Content: 6 pages
Industry: Other

Photocurable Materials for 3D Printing

A talk on disruptive technology, market figures, technologies in additive manufacturing and UV=LED in additive manufacturing. As well as details on various testing results.

Costs: € 10,00 
Content: 19 pages
Industry: Other

Conversion and shrinkage distribution in layer-bylayer-cured UV resin under oxygen inhibition - A model of 3D UV Inkjet Printing System

K. Taki

The 3D UV additive production system employs a photopolymerization to build up thin layers of a part of 3D-object.  We developed a one-dimensional mathematical model of the photopolymerization kinetics to elucidate the conversion of monomer and shrinkage.  The photopolymerization is likely inhibi

Costs: € 10,00 
Content: 22 pages
Industry: Other

Advances in Two-Photon Initiated Photopolymerization for Tissue Engineering Applications

M. Tromayer

The process of two-photon induced polymerization (2PP) enables free-form stereolithography with a resolution in the sub-micrometre range.

Costs: € 10,00 
Content: 26 pages
Industry: Other

3D Printing - An Overview

I. Ferguson

3D Printing - Additive Manufacturing An Introduction

Costs: € 10,00 
Content: 15 pages
Industry: Other

Solutions to enhance performance of UV-LED and low energy curable systems

LED & Oxygen Inhibition Ways to overcome Oxygen Inhibition and achieve Surface Cure NEW solution for optimized performance.

Costs: € 10,00 
Content: 20 pages
Industry: Other

Developments in UV LED equipment

M. Scholdt, IST METZ GmbH
Outline: 
  • Motivation
  • Evaluation of UV radiation
  • Possible LED power
  • Evaluation of LED systems
  • IST LED solutions
  • conclusions
Costs: € 10,00 
Content: 18 pages
Industry: Other

Advancements in UV LED Technology and its Impact on UV Curing Applications

In just the past few years, advances in UV LED technology has been able to provide peak output powers commensurate with and greatly exceeding microwave lamps.

Costs: € 10,00 
Content: 23 pages
Industry: Other

Improved Surface Cure with UVC LED

T. Bizjak

Formulation modification has enabled the use of an increasing number of UV LED curable adhesives, inks, and coatings for commercial applications.  Among the available formulations, the variation in curing performance is quite large and surface cure remains the biggest challenge to overcome with L

Costs: € 10,00 
Content: 16 pages
Industry: Other

Pages